The software displays a clear summary of temperatures, fan speeds and the status of on/off components such as the pump and gas block. In some versions this can be shown as a graph. Recom summarises all settings of the boiler protection automaton in a clear worksheet. Clear parameter names and explanatory notes make the display particularly comprehensible.

You can save settings on your hard drive, so that you can restore the starting values at any time and use the same settings for several boilers in the same project. Keeping a printout of the parameter list with the project information will enable anyone to see which settings have been used.

Sometimes it can be useful to monitor a system for a longer period of time. Recom can log and save all boiler data over a longer period of time, so that the cause of a problem can be traced back.

Recom software advantages:

• Change the boiler parameters at user and service level.
• Read out and delete errors from the error memory of the boiler.
• Displays current measured values such as supply and return temperatures, fan speed, on-of statuses etc.
• Current values also displayed as a graph.
• Print parameters and graphs.
• Save and read in parameter values onto the hard disk.
• Calculation window displaying the differences between the measured values at two different times.
• The interface or null modem cable required, is available from Remeha.
• Built-in languages: Dutch, English, French, German and Italian.
• Updates can be downloaded from the internet.

Click here to go to the Recom software Website

Controls for Quinta Pro

A range of controls are available for control of the Quinta Pro range and the Gas 210 Pro range of boilers.

• iSense Control (for single boiler control)
• iSense Control + MC4 Sequencing control (for multiboiler control, up to 4 boilers)
• iSense Pro Control (for advanced multi boiler control, up to 8 units)

For guides on how the controls may be used, please refer to the Quinta Power Control Schematic Booklet.

Alternatively the Quinta & Gas 210 Pro boilers may be controlled by a building management system (BMS) using a variable signal 0-10V DC, to vary the output of the boiler.

Click here to view Control & Accessory documentation

Controls for Gas 210 Eco Pro

A range of controls are available for control of the Gas 210 Pro range of boilers.

• iSense Control (for single boiler control)
• iSense Control + MC4 Sequencing control (for multiboiler control, up to 4 boilers)
• iSense Pro Control (for advanced multi boiler control, up to 8 units)

Alternatively the Gas 210 Pro range of boilers may be controlled by a building management system (BMS) using a variable signal 0-10V DC, to vary the output of the boiler.

Click here to view Control & Accessory documentation

Controls for Gas 310 Eco Pro

A range of controls are available for control of the Gas 310 range of boilers.

• iSense Control (for single boiler control)
• iSense Control + MC4 Sequencing control (for multiboiler control, up to 4 boilers)
• iSense Pro Control (for advanced multi boiler control, up to 8 units)

Alternatively the Gas 310 Eco Pro range of boilers may be controlled by a building management system (BMS) using a variable signal 0-10V DC, to vary the output of the boiler.

Click here to view Control & Accessory documentation

Controls for Remeha Gas 610 Eco Pro

A range of controls are available for control of the Gas 610 range of boilers.

• iSense Control + MC4 Sequencing control (for multi boiler control, up to 2 x 610 boilers)
• iSense Control (for advanced multi boiler control, up to 8 units)

Alternatively the Gas 610 Pro range of boilers may be controlled by a building management system (BMS) using a variable signal 0-10V DC, to vary the output of the boiler.

Click here to view Control & Accessory documentation

Control for Gas 360 & 460

The built in instrument panel on the 360 and 460 boiler ranges contains all the necessary control and measuring instruments required to control the boiler.

The connections to it are made on a terminal strip. The capillaries and sensor wires, which come from the control panel, are placed in the instrument pockets that are fitted at the front of the boiler.

Click here to view Control & Accessory documentation

Control for P Series

The built in instrument panel on the P series boiler range contains all the necessary control and measuring instruments required to control the boiler.

The connections to it are made on a terminal strip. The capillaries and sensor wires, which come from the control panel, are placed in the instrument pockets that are fitted at the front of the boiler.

Click here to view Control & Accessory documentation

Controls for Biomass

Click here to view Control & Accessory documentation

They are designed exclusively for the preparation of hot water for commercial and industrial premises and fired by a number of atmospheric multi-gas stainless steel burner bars.

Rem 35 Auto
Output: 658 l/h at 44°C raise

Rem 50 Auto
950 l/h at 44°C raise

Rem 70 Auto
1336 l/h at 44°C raise

Rem 90 Auto
1713 l/h at 44°C raise

Click here to download
The new Remeha REMPRESS PRESSURE SETS AND REMTANK CALORIFIERS Brochure

Using the Remeha-Gilles Biomass boiler range (wood chip & pellets) is the most efficient way of getting heating equipment to run on low to zero carbon fuel. When heat is required on demand, the modulating fully controllable automatic Biomass boilers are the solution.

The boilers have an increased service life because of their modulating outputs which range from 12.5kW-550kW.
Global climate change is the most pressing environmental challenge of our time and one of the major causes of climate change is emissions of carbon dioxide (CO2) from burning fossil fuels.

One of the most important environmental benefits of using sustainably produced wood for energy in place of fossil fuels is its positive impact in moderating long-term global climate change.

• Environmentally-friendly, low carbon heating
• Up to 93% combustion efficiency (TÜV Report)
• Heat outputs from 12.5 to 550kW
• Robust design for exceptional durability and reliability
• Unique cell wheel combustion technology for 100% protection against burnback
• Modulating, fully controllable burners
• Automatic fuel feed systems
• Settings for different fuels
• Automatic de-ashing
• Automatic heat exchanger cleaning
• Automatic error message via email
• Remote monitoring via internet
• Graph record of all heating parameters on the internal memory
• Expertise gained from over 450 Biomass boiler installations in the UK
• New easy-to-use touch screen controls – Remeha Touch
• Flexible control via computer, tablet or smart phone
• Eligible for RHI funding – currently above 45kW